DT Software
-
【DT Software】
-
一、FAQ
-
1、The size of the templates are different after importing the DXF file.
Tips：Make sure that you´ve chosen the same unit when you import the DXF file to avoid the change of size.
2、The words are garbled after importing the DXF file.
Tips：Be well awared of the language of software before importing the DXF file to avoid garbled words.
3、Some lines deformed after importing the DXF file.
Tips：If some lines appear deformed after importing the DXF file, can double click the angular points to recover.
4、Too many angular points after importing the DXF file.
Tips：The knife would elevate and change direction at an angular point while at an curve point it doesn´t. So the angular points can be changed to curve points by double click on them.
|